Automotive Kits & Accessories

Automotive Test Lead Set

Part No: 129393
Features: This high quality Test Lead Set has been designed with the automotive engineer in mind.
Each kit comprises of:-

A pair of double ...

Non Intrusive Test Lead set

Part No: 129616
Features: This kit has been designed for when cable piercing is either not practicable or permitted.

Each kit comprises of:-
A pair of double insulated ...

Intrusive & Repair Kit

Part No: 129602
Features: This kit has been designed for when cable piercing has to be done, but then gives the technician the facility to repair the cable.
Each ...

Automotive Test Kit In Hard Case

Part No: 129626
Features: This kit comprises of:-
1 Red and 1 Black Extra Sharp Long Reach Probes (155mm).
1 Red and 1 Black Standard Back Probes.
1 Red ...

Scope Series Back Probe Kit

Part No: 905266
Features: This kit comprises of :-

4 off colour coded 2 metre (76 inches) high quality double insulated silicone test leads.
Rated 1000Volt ...

Back Probes

Part No: 121051/Colour
IEC 1010 Rating: 1000V CAT II Double/Reinforced Insulation 10Amps
Standard Colours: Black, Red
Features: A pair of slim back probing probes, these incorporate a 'spring steel' prod which allows greater flexibility and less damage when attempting to override the ...

Easy Access Back Probe Sets, 4 Colour

Part No: 134388
Features: 0.7mm (0.028”) O.D. Back Probe Pins.
Perfect for connecting to fuel injectors, MAP and TPS sensors, as well as any weather pack seal type connectors.

Easy Access Back Probe Sets, Black & Red

Part No: 134382
Features: 0.7mm (0.028”) O.D. Back Probe Pins.
Perfect for connecting to fuel injectors, MAP and TPS sensors, as well as any weather pack seal type connectors.

Extended Back Probe

Part No: 121527/Colour
Standard Colours: Black, Red, Green, Blue, Yellow
Features: Extended back probes with a 44mm long ‘spring steel’ contact.
1mm (.039”) O.D. Back Probe Pins.
Supplied with protective cap.

Back Probe Leads

Part No: 121521/Colour
Standard Colours: Black, Red
Features: This unique Back Probe enables measurement in confined areas. The attached lead with socket allows
connection with any standard 4 mm plug.

Small Back Probe with Cable Piercer Adaptor

Part No: 121522/Colour
Standard Colours: Black, Red, Green, Blue, Yellow
Features: The small back probing probe (121520) can now be supplied together with a unique adaptor (113459).
This allows the operator to now use the probe ...

Extra Sharp Long Reach Prod

Part No: 121057/Colour
IEC 1010 Rating: 1000V CAT II 20Amps
Features: These probes have a 155mm stainless steel shaft ideal for probing through to those hard to reach places. The tip of the probe is designed ...

Cable Piercer

Part No: 121046/Colour
Standard Colours: Black, Red
Features: Will accept all standard 4mm plugs.
Ideal for Automotive applications.
N.B. Recommended for safe voltage piercing only.

HD Cable Piercer

Part No: 121060/Colour
Standard Colours: Black, Red
Features: •Incorporates 4mm Socket capable of accepting all 4mm Plugs- whether shrouded or unshrouded.
•Captive cable slot allows for hands free use once cable is pierced.

Repairing Tape

Part No: 116405
Features: Self Fusing Silicone Wrap.
Withstands over 260° C.
Insulates to 8000V per layer.
Stretches 300%.
Many other applications.

Magnetic Test Adaptor

Part No: 124170/Colour
Standard Colours: Black, Red
Features: Will accept all standard 4mm plugs.

Small Vehicle Jump Lead.../...Vehicle Computer Memory Saver Lead

Part No: 126104/Colour
Standard Colours: Black, Red
Features: This unique lead doubles as a Small Vehicle Jump Lead for when the traditional Jumper clips are too large for the smaller battery terminals, the ...

Power Probe Accessory Kit

Part No: 129554
Features: This unique kit has been designed to be used with the ever popular 'Powerprobe' circuit testing devices.

Compatible with versions I, II and ...
Web Design Hertfordshire by Shy Studios